RUN AT POWERUP
(INTRO)
- LANGUAGE
- Karel
- CREATED
- 2016-10-31
- MODIFIED
- 2019-11-21
CODE 
/PROG POWERUP
/ATTR
OWNER = MNEDITOR;
COMMENT = "RUN AT POWERUP";
PROG_SIZE = 1231;
CREATE = DATE 16-10-31 TIME 13:33:52;
MODIFIED = DATE 19-11-21 TIME 11:36:00;
FILE_NAME = ;
VERSION = 0;
LINE_COUNT = 27;
MEMORY_SIZE = 1503;
PROTECT = READ_WRITE;
TCD: STACK_SIZE = 0,
TASK_PRIORITY = 50,
TIME_SLICE = 0,
BUSY_LAMP_OFF = 0,
ABORT_REQUEST = 0,
PAUSE_REQUEST = 7;
DEFAULT_GROUP = *,*,*,*,*;
CONTROL_CODE = 00000000 00000000;
/APPL
AUTO_SINGULARITY_HEADER;
ENABLE_SINGULARITY_AVOIDANCE : TRUE;
/MN
1: --eg:Copyright (c) 2019 DIY-Robotics.com All rights reserved. ;
2: --eg: ;
3: --eg:Redistribution and use in source and binary forms, with or without ;
4: --eg:modification, are permitted provided that the following conditions
: are ;
5: --eg:met: ;
6: --eg: ;
7: --eg:Redistributions of source code must retain the above copyright ;
8: --eg:notice, this list of conditions and the following disclaimer. ;
9: --eg:Redistributions in binary form must reproduce the above ;
10: --eg:copyright notice, this list of conditions and the following
: disclaimer ;
11: --eg:in the documentation and/or other materials provided with the ;
12: --eg:distribution. ;
13: --eg:Neither the name of DIY-Robotics.com nor the names of its ;
14: --eg:contributors may be used to endorse or promote products derived from ;
15: --eg:this software without specific prior written permission. ;
16: --eg: ;
17: !Loop500ms Timer Start ;
18: TIMER[19]=RESET ;
19: TIMER[19]=START ;
20: ;
21: !StartResetLock Timer ;
22: TIMER[20]=RESET ;
23: TIMER[20]=START ;
24: ;
25: WAIT 1.00(sec) ;
26: RUN UALM_LOG ;
27: ;
/POS
/END
Comments
0 comments