Answered PAC Install to Teach Pendant

Follow

Hi Vicky ,

Here is the procedure , 

1. Purchase the PAC (Product Authorization Code). 

2. You need to place your image file which you have received with the robot. ( It can be a install card or USB stick ). Place that in MC or UD port. 

(if you do not have image file contact Fanuc , They will charge approx. $500 for image file )

3. Do a controlled start. 

Here is the link for controlled start procedure :-

https://forum.diy-robotics.com/hc/en-us/community/posts/360055356211-Controlled-start

4. After performing a controlled start , Follow Below Procedure

Menu --> S/W Install --> Load Media --> Select Media --> Choose PAC option --> Authorize --> Four Digit Code --> Done.

It will take time for installation. 

5. Cold Start