1. DIY-Robotics (Help Center)
  2. Community
  3. Troubleshooting — FANUC

Interaction with input of TP-Karel Program

Avatar
Juan Turner

Hi

I am having an issue with a program where a dialogue box is appearing requiring to have a value to be entered. I am in need the required value to be usable in the TP program as well.

I was thinking of using Karel but the thing is that I am not having any experience of Karel as much which necessarily requires the use of registers as I am required the robot to have a prompt operator for entering the values and turning ON the beacon light whenever an input is required.

My question is how to perform this function in Karel?
Looking for answers

Didn't find what you were looking for?

New post

Comments

4 comments

Sort by Date Votes
  • Avatar
    Braylen Mcconnell
    Comment actions Permalink

    Hey Juan , 

    Hope you have having a good day. 

    I have answered this query on this forum. Kindly take a look. 

    https://forum.diy-robotics.com/hc/en-us/community/posts/360055425211-Karel-argument-

    Good Luck. 

    Happy Roboting..!!

    0
  • Avatar
    Muhammad Ishaq
    Comment actions Permalink

    Hi juan!
    The use of menu utility is far easy when you are using Karel. FANUC has offered it as a free option, however I remember that last time when I got the PAC code, they were charging but now it is free of cost. I am going to call FANUC for you and if still there is any free option then I will send you the PAC code which will work 100 percent okay.

    0
  • Avatar
    Chang Thriving
    Comment actions Permalink

    I think you are required for creation of dialog display and then you must be asking the operator to enter data in form of variables. In one of the KAREL manual's which I used few months back for ROBOGUIDE, it was mentioned and it worked for me. It will work for you too.

    0
  • Avatar
    Christopher Bradley
    Comment actions Permalink

    Muhammad Ishaq, PAC Code Fanuc free, i'm not sure about that.

    All PAC Code is unic. When buy a PAC Code, this information is required:

    1. F-Number
    2. Controller ID
    3. Software Serial Number
    4. Controller Type (R-30iB, R-30iA, R-J3iB, R-J3, R-J2)
    Software Release
    Software Application (HandlingTool / ArcTool / PalletTool...)
    5. Requested Options

    Only Fanuc Support have Key Generator.

    0

Please sign in to leave a comment.