1. DIY-Robotics (Help Center)
  2. Community
  3. Troubleshooting — FANUC

Answered Teach Pendant Hanged at starting screen

Avatar
Ezequielo Murillo

Hi girls & Guys!

Has anyone ever had some teach Pendant Hang problems? It hangs on starting screen..

We tried by shutting down the controller in order to have access to the teach but its not working.. Does anybody have an idea what's going on here?
 
Thanks in advance!
 

Didn't find what you were looking for?

New post

Comments

3 comments

Sort by Date Votes
  • Avatar
    Sarwat Anjum
    Comment actions Permalink

     
    Hi Ezequielo!
     
    Seems like your fuses burnt. Can you tell us your Controller model? It will help to troubleshoot the issue.
     
    0
  • Avatar
    Ezequielo Murillo
    Comment actions Permalink

    Hi Sarwat, it's Controller R-30iA

     

    1
  • Avatar
    Sarwat Anjum
    Comment actions Permalink

    You can try out following inspections and actions:

    Check that the status display LED and 7-segment LED on the main board operate normally. if yes then Carry out an action according to the LED status.

    If the LED on the main board does not light in inspection 1, check if FUSE1 on the main board is blown.
    (a) When FUSE1 is blown See action 1.(b) When FUSE1 is not blown See action 2.

     

    Action 1:

    (a) Replace the backplane board.
    (b) Replace the main board.
    (c) When an option board is installed in the option slot, replace the option board.

     

    Action 2:

    (a) Replace the emergency stop unit.
    (b) Replace the cable between the main board and the emergency stop unit.
    (c) Replace the boards indicated in action 1.

    Have a Good day!

    0

Please sign in to leave a comment.