1. DIY-Robotics (Help Center)
  2. Community
  3. Troubleshooting — FANUC

Answered R-30iA Teach pendant not turning ON

Avatar
Bailey Chapman

Hi Everyone!

My Teach Pendant seems to have a serious problem. it is not powering on and not even showing any Alarms, seems to be a power issue? I have no experience of this kind of situation before.. Any authentic suggestions are welcomed!

Didn't find what you were looking for?

New post

Comments

2 comments

Sort by Date Votes
  • Avatar
    Masako Cynesige
    Comment actions Permalink

    Hi There!

    According to Manual:

    (Inspection 1) Confirm that fuse FUSE2 on the emergency stop printed circuit board is not blown. When it is blown, the LED on the emergency stop printed circuit board lights in red. When FUSE2 is blown, carry out action 1 and replace the fuse.


    (Inspection 2) When FUSE2 is not blown, carry out action 2.


    (Action 1)

    (a) Check the cable of the teach pendant for failure and replace it as necessary.
    (b) Check the teach pendant for failure and replace it as necessary.
    (c) Replace the emergency stop printed circuit board.


    (Action 2)

    When the LED on the main board does not light, replace the emergency stop unit. When the LED on the main board lights, carry out action 1.

    1
  • Avatar
    Masako Cynesige
    Comment actions Permalink

    Here's a visual for your assistance:

    1

Please sign in to leave a comment.