Hello,
I have been trying to solve the reason behind my teach pendant not displaying any job which is running. I am using FANUC R30iA mate controller.
I am in need the pendant to show the all running jobs.
Someone of you guide me please.
Answered Teach Pendent issue
Didn't find what you were looking for?
New post
-
Comment actions
Dear Chang!
I hope you have not pressed the "Edit" key or you have pressed it?
-
Comment actions
Hi laurance,
No, I have not pressed anything including EDIT but it is a fact that pressing the EDIT key has brought back the job to screen but at the moment I am running 2 jobs simultaneously in CAMCO rotating table 1 and 2 jobs. Therefore, after pressing the EDIT key my job 2 has been brought to my screen but it has not threw the program when job 2 was running and it also didn't change the job 1 whenever the table has rotated and was running.
Please suggest a way out
-
Comment actions
In my opinion it must be the display that the current program is running through.
Can you please tell me whether you are having a main program for calling both jobs 1 and 2? If this is the case then select the program and highlight the main portion and then press enter. It must then display in proper manner.
-
Comment actions
Well, there is a main program however, i am not sure which of the parts is serving jobs 1 and 2. I have just noticed that if i am going to job no 1 and it is in running state, then I am not able to watch it and scroll the threw the rest of program, however, when it is starting the next job it has noting change over the screen for running the job no 2.
-
Comment actions
If you are having the major program to be calling for both jobs 1 and 2, then you are required to select it and then press the EDIT and seeing the called program logic. It might be named as RSR0001 or PNS0001 or anything like this.
-
Comment actions
I would suggest you to try hitting select and then monitor. It may help
Please sign in to leave a comment.
Comments
6 comments