Vjacheslav Shkrebitcko
Activity overview
Latest activity by Vjacheslav Shkrebitcko-
Vjacheslav Shkrebitcko commented, I did it, now the robot is working correctly. If anyone is interested, the problem was as follows: I found out that the batteries were replaced when the robot's power was turned off, because of th...
-
Vjacheslav Shkrebitcko commented, No, I haven't tried, I'll try and let you know what happened (it will be tomorrow or a little later), thank you.
-
Vjacheslav Shkrebitcko commented, Yes, I checked it, the data matches.
-
Vjacheslav Shkrebitcko commented, I did it according to the manual, like this: At first I had SRVO-062 BZAL error, I did Menu->System->Master/cal and press F3 (RES_PCA) > F4 (yes) and rebooted the controller, then there was SRVO-07...
-
Vjacheslav Shkrebitcko created a post, Incorrect robot movement after battery replacement
Hello, the voltage on the batteries was lost and they were replaced, after that mastering and calibration was done, the TCP was set up, but after all this the robot moves uncorrectly, that is, I ch...