Mathieu Berube
Comments
-
Hi, What communication protocol are you using and where are you plugged in the robot?
-
Hi John, If you cycle power the robot, it will increase automatically the number of JBFs and may solve your problem. If not, try to increase it manually in the variables: $cp_paramgrp[].$num_jbf ...
-
Hi Luis, Try to check if the cable of the teach pendant is correctly screwed in. If yes, check if this cable is damaged. Here's the Fanuc procedure for this alarm.
-
Hi, Have you tried the Robot Accuracy Enhancement Techniques? If not, check this post and follow the steps that you can see starting at the post from February 22 Fanuc 100ib axis issues – DIY-Rob...
-
Hi, The first thing you need to check is if your MASTER_COUNT in the DMR_GRP match the Mastering data that you can find on the inspection sheet provided with the robot. Can you validate that?
-
Hi, What mastering procedure did you followed? Do you still have the Fanuc paper that has the pulse count on it?
-
Hi Jason, This error is happening when there is 1 of the two channels of the safety Fence line that is not ON (here the line 1) or it falls not at the same time than the second channel. Is there ...
-
Hi Rodrigue, Is the version of your Boot Card match the version of the robot?
-
Hi, Can you give us the part number of the light curtain?
-
Hi, On the Wait position PR(2) can you press F4 for position so we can see the values of that point? Also when doing positions with position register, be careful because it's not limited to the fra...