Ayan Hudson
Activity overview
Latest activity by Ayan Hudson-
Ayan Hudson commented, Hi Losev! Thank you for your help. Very nice works. I have been thinking about the stiffness of the system. If the cutting forces are too high it could cause vibrations. Maybe it is necesarry to us...
-
Ayan Hudson created a post, Machining with robot
Hello ! I would like to ask some help from you: is it possible to milling wood workpieces (with good surface quality) using a robot ? If yes what are the pros and contras to machining with a robot ...
-
Ayan Hudson commented, Hi! I agree with Arturo, there is no freeware OLP software ,but prices vary hardly by location and by customer. For example if you are a new integrator you can get good prices from robot manufactur...
-
Ayan Hudson commented, Hello Vivan! This article is exactly for you, you can find every information you need: https://blog.robotiq.com/machine-tending-bundle
-
Ayan Hudson commented, Hello Vivan! Do you design your cell for a specific application or for "universal" use? Here you can find some good tips especially for cobot cell design: https://blog.robotiq.com/the-right-way-to-...
-
Ayan Hudson commented, Hi Vivan! It is depending on application. For most of the industrial application is gripper plus custom fingers, because the robot handle just one type of part for long time. It provides the highes...
-
Ayan Hudson commented, Hi! OK, I understand. Another option is : using a vaccum cup to pick the part out from the blister; place the part in a holder; change the robot tool to paralell gripper; pick the part with the pa...
-
Ayan Hudson commented, Hi Zachary! My first idea is : you can pick up somehow with vacuum, but I have some question: Can you give us a picture or a drawing about the blister and the workpieces? Does the workpiece has to ...
-
Ayan Hudson commented, Hi Ezequielo! Could you provide more information, eg.: what is the size of the workpiece, where the lubricant oil have to dispense? what is the desired speed? do you need 6 axis robot or a 4 axis ...
-
Ayan Hudson commented, Hi! I wolud like to thanks again. Today we changed the robot with the help of the positioner and it works perfectly.