Answered TOOL-OFFSET

Follow

Hello,

Here is the procedure,Offset using REGISTERS

R[28:OffsetValue]=25
and
PR[10] would intitially be at 0,0,0,0,0,0 for xyzwpr

!Place the part!
L PR[40:PartPlaceLocn] (Dis)mm/sec
Offset, PR[10]

!Change the position register value with A REGISTER!
PR[10,3]=PR[10,3]+R[28:OffsetValue]

!Increment offset!
R[28]=R[28]+25 <--- With this, every time the cursor pass through this instruction, the value of register 28 will increment 25.

Hope this was helpful!

Thank you for quick answer .. !!