Hi all,
I often keep on posting the problems that I face. I am having a trouble here again.
If I am wishing to feed a wire of welder no 1 to that of welder no 2 then will I be able to switch the welder from #1 to that of #2 and then back from #2 to #1 through teach pendant? If yes then how?
For your information, I am using FANUC RK3iB controller.
Waiting for answers.
Didn't find what you were looking for?
New post
Hi Juan,
In my opinion you must be able to select various of equipment mere with an equip button or at least till it is setup as a different group after which you would be able to change the group. However, you don't need to consider my words as the final and I may be wrong and it would not work with the welding tandem, therefore i am making an assumption that it will be of 2 spot per per gun.
Good Luck :)
Hello,
You can make a configuration upto 4 welding equipment. You are required to purchase multi equipment option Fanuc.
So basically, you can set individual parameters for all of it and even that can be plugged to the different power sources.
You can set different weld parameters for all different process.
You can create TP program for each process and use group mask and use particular equipment in the TP program. Call the TP program accordingly .
Please sign in to leave a comment.
Comments
2 comments