Masako Cynesige
Posts
-
Answered
ISDT-007(G:0, A:1)
Hi Everybody, Can anyone here tell me what is this alarm ISTD-007 (G: 0, A:1), i am getting on my fanuc paint robot? Unfortunately i could not find anything related in the manuals? This alarm is re...
-
Answered
Weld enable mismatch
Hello Guys I'm getting an error reading "weld enable mismatch" along with "mod 1010" faults. I can't figure out what's wrong or how to clear them. Anyone can help me with this? Thanking you guys i...
-
Answered
Gear ratios info
Hi Guys! I need Gear Ratios Information of harmonic transmissions on the axes of Fanuc Arc mate-100i. Does Fanuc provide this information? Or is it available in manuals well i have checked manuals ...
-
FANUC HMI R553 option
Hi Guys, I wanted to ask you guys, if the HMI Device R553 OPTION is standard on the Fanuc R-30iA controller or it could be initiated or selected some way? Thanks in advance!
-
Answered
Fanuc Arcmate 120 iC burns tip of the weld
Hi Y'all! I am using a FANUC Arcmate 120iC with a servo torch and a Lincoln 455 Powerwave for .035" aluminum wire and we cannot get it to stop burning tips very often. The welds look great but it b...
-
Answered
Fanuc 2000ic 210f Fence height
Hi Everyone! Can someone Guide me about Defining Fence height requirements of a Fanuc 2000IC 210F Robot? Thanking you in anticipation.
-
Answered
Unable to connect to an online running GE fanuc LM90-30
Hi Everyone, I am using GE Fanuc LM90-30 and I am uploading PLC program from an online-running GE Fanuc LM90-30 series with the CPU 363. The PLC program running online uses proficy machine edition ...