Sebastien Ostiguy-Beaulieu
Comments
-
David, Keyence IL-600 with IL-1500 amplifier. I don't have a second robot, the analog card was borrowed from a supplier, but the card was working before sennding it to me. Like I said, I already tr...
-
David, The only difference I'm seeing is that my laser is outputing 5v instead of 10v, but worst case I'll see something around 0-2047 instead of 0-4095..I checked my ground with the casing and it'...
-
Hi David, Here is a picture :
-
Hi everyone. I just solved the problem last week. I think this is very specific to my robot (the background Karell running that I don't have access to) but I wanted to share my solution in case som...
-
Hi Mathieu, would you mind reaching me by email so I can transfer you the backup ? Thanks
-
V7.40P-08
-
Mathieu, I cleared the history BEFORE running programs few times, sorry if I wasn't clear. So I just did it again and absolutely NOTHING appears on both pages when the program PAUSE.. By the way, ...
-
I just cleared all the previous error and ran CHEVALET and BIDON program few times. No error at all. It always PAUSE at a motion, as far as I can see (line 8 of CHEVALET and line 2 of BIDON)
-
Mathieu, I only ''select'' the desired program with the TP, then press Cycle Start on the controller. I really don't know what's the difference between RSR or PSN and how to deal with them.
-
Salut Mathieu, See following pictures for my set-up. Never touched this :