David McBean
Activity overview
Latest activity by David McBean-
David McBean commented, Hi Khaled, Having a picture of the screen would help us out. But one thing you could try is make a clear cache. To do it, open the TP Tablet application then in the Fanuc application swipe the scre...
-
David McBean commented, Hi Akash, What type of controller do you have with your robot? Maybe the issue comes from a blown fuse on a board. DIY-Robotics productshttps://diy-robotics.com/products/
-
David McBean commented, Hi, Is it possible that you have a mechanical issue? What I mean is, Bearing jamming a little that will make enough resistance for the controller to detect an excessive force? Is the table on some ...
-
David McBean commented, Sébastien, We don't really think that it could be a variable thing, never had to play with variables while setting up an I/O rack. to help us out is it possible to have the keyence part number to g...
-
David McBean commented, Sébastien, For the configuration of AI if the analog card is in the good slot everything should be ok. here is a picture of how to wire the analog card, your wiring seems ok, but maybe you need to ...
-
David McBean commented, Hi Sébastien, Do you have a picture of the configuration setup of your AI page? If wiring seems good and the 0-10V output is ok maybe it's the configuration. DIY-Robotics productshttps://diy-ro...
-
David McBean commented, Hi Sylvain, To begin on the TP tablet you need to open the drop down menu list, then press on this button to get the full menu list Then in the menu go to SYSTEM If you don't see MASTER/CAL in th...
-
David McBean commented, that's awsome thank you for sharing !! DIY-Robotics products https://diy-robotics.com/products/
-
David McBean commented, Hi John68, That means that the batteries for the encoders are down or unplugged and the controller as been shutdown. Robot lost the reference between the pulse encoder and degree related, a new mas...