David McBean
Comments
-
that's awsome thank you for sharing !! DIY-Robotics products https://diy-robotics.com/products/
-
Hi John68, That means that the batteries for the encoders are down or unplugged and the controller as been shutdown. Robot lost the reference between the pulse encoder and degree related, a new mas...
-
Hi Khaled, Having a picture of the screen would help us out. But one thing you could try is make a clear cache. To do it, open the TP Tablet application then in the Fanuc application swipe the scre...
-
Hi Akash, What type of controller do you have with your robot? Maybe the issue comes from a blown fuse on a board. DIY-Robotics productshttps://diy-robotics.com/products/
-
Hi, Is it possible that you have a mechanical issue? What I mean is, Bearing jamming a little that will make enough resistance for the controller to detect an excessive force? Is the table on some ...
-
Sébastien, We don't really think that it could be a variable thing, never had to play with variables while setting up an I/O rack. to help us out is it possible to have the keyence part number to g...
-
Sébastien, For the configuration of AI if the analog card is in the good slot everything should be ok. here is a picture of how to wire the analog card, your wiring seems ok, but maybe you need to ...
-
Hi Sébastien, Do you have a picture of the configuration setup of your AI page? If wiring seems good and the 0-10V output is ok maybe it's the configuration. DIY-Robotics productshttps://diy-ro...
-
Hi Sylvain, To begin on the TP tablet you need to open the drop down menu list, then press on this button to get the full menu list Then in the menu go to SYSTEM If you don't see MASTER/CAL in th...