Mathieu Berube

1. Community
2. Troubleshooting — FANUC
3. Roboguide Installation Error Exception Code

Hi Sylvain, We had this error in the past and we resolved it by setting the language of our windows in english during the installation. Try this if you are admin of your computer.   DIY-Robotics pr...

• View comment
• Created October 12, 2022 20:06
• 0 votes

1. Community
2. Troubleshooting — FANUC
3. SRVO-046

Hi Shane,   An OVC alarm occurs when the robot is cumulating some high electrical power in a specific amount of time. If there's nothing applying force on the robot and you get an OVC, maybe the pr...

• View comment
• Edited July 12, 2022 15:45
• 0 votes

1. Community
2. Troubleshooting — FANUC
3. SRVO-068 DTERR Alarm on Fanuc Robot

Hi Arivazhagan, Can you give us a Error code? Usually, this error comes from the cable that connects all the motors of the robot.   DIY-Robotics productshttps://diy-robotics.com/products/

• View comment
• Edited July 04, 2022 11:58
• 0 votes

1. Community
2. Programming — FANUC
3. Modifiying UFRAME through Position register

Hi Ismail,   You need to use this function in the robot: You will then be able to choose your Uframe number and your PR number:   DIY-Robotics productshttps://diy-robotics.com/products/

• View comment
• Created May 20, 2022 16:00
• 0 votes

1. Community
2. Mechanical Design
3. DIY Robotics Payload Calculator Tool - adding CRX models soon ?

Hi,   Yes, sorry about that, we should be adding the CRX robots to this payload calculator soon. For now, can you post us what you see in SolidWorks and we will provide you the values to enter in t...

• View comment
• Created April 28, 2022 19:35
• 0 votes

1. Community
2. Programming — FANUC
3. CRX drop object while in auto mode

Hi Maxime, If the change in the force apply is small, by enabling the Auto Resume in the collaborative robot menu of the DCS, the robot should continue: If the change in the load applied to the ro...

• View comment
• Created April 28, 2022 19:31
• 0 votes

1. Community
2. Programming — FANUC
3. CR 35ia payload error while moving in auto mode

Hi Maxime,   Can you check if the Auto resume is activated in your DCS? You can find this feature in Collaborative Robot menu of the DCS   DIY-Robotics productshttps://diy-robotics.com/products/ 

• View comment
• Edited April 28, 2022 19:31
• 0 votes

1. Community
2. Programming — FANUC
3. CR 35ia payload error while moving in auto mode

Hi Maxime,   For the robot to be colab, the DCS is programmed in a way that it requires a human action for the reset when it detects a contact stop. The result of dropping parts is the same as a co...

• View comment
• Created April 22, 2022 15:16
• 0 votes

1. Community
2. Programming — FANUC
3. CRX drop object while in auto mode

Hi Maxime,   The CRX will see that as a change in the force applied to him so it will result as a contact stop.   DIY-Robotics productshttps://diy-robotics.com/products/ 

• View comment
• Edited April 22, 2022 15:08
• 0 votes

1. Community
2. Troubleshooting — FANUC
3. Error Roboguide V9 Rev N

Hi Adrien, Is your license on a server or local on your laptop? Also, are you admin of your computer?   DIY-Robotics productshttps://diy-robotics.com/products/

• View comment
• Created March 31, 2022 19:16
• 0 votes