Mathieu Brodeur
Activity overview
Latest activity by Mathieu Brodeur-
Mathieu Brodeur commented, Hi Raj,Your post is in the Educative Cell topic of the forum.Which is related to a DIY Educative project (not related to FANUC).Is it intentional ?If you want to connect a OMRON PLC to your DIY Edu...
-
Mathieu Brodeur commented, Hi,MOTN-074 (G:1) Message: Error in speed (G:%d^2) Cause: Speed is not within 0 to $speedlim Remedy: Set speed within 0 to $speedlimWhen executing the "Measure Camera's Position" ...
-
Mathieu Brodeur commented, Hi,You need to contact FANUC and purchase the PAC (Product Authorization Code) for this option.
-
Mathieu Brodeur commented, First, check the status.In: Menu /Control Pnael / Safety Controller / Synchronization If Status is red, you will need to Synchronize the robot. Make sure you are logged in as Safety user. Jog the ...
-
Mathieu Brodeur commented, Hi !Can you jog the robot in manual mode (joint)?Can you check the status of the SafeMove system ? You might need to re-synch your robot.
-
Mathieu Brodeur commented, Most suppliers are backorder for those batteries right now... Here's what I found:General Electric FANUC A98L-0031-0011 replacement battery (batteryguy.com)https://batteryguy.com/general+electric+f...
-
Mathieu Brodeur commented, Hi Paul, First of all, I can garantee that the provided PC software works on my end.However, it is obvious that many people have problems with it, so it needs to be improved. Keep in mind that this...
-
Mathieu Brodeur commented, Hi,You can disable the contact stop from a Digital output (DO[x]).First, set unassigned DO to NSI. In this example, DO[70] = NSI[1]. NSI is RACK 36, SLOT 0 You might have to reboot the robot for th...
-
Mathieu Brodeur commented, Would it be possible to modify the KAREL to add a few "slots" ?What if you link those "slots" from the KAREL to String Registers ?So instead of modifying your KAREL to enter the correct program nam...
-
Mathieu Brodeur commented, Hi Dan !Interesting problem.When you run a program that you have created (not demo ones), does the robot stop when a person gets in the «red/stop» zone ?Is the problem only that the robot does not ...