Chang Thriving
Comments
-
Dear Mohammad, Bundle of thanks for your response and suggestions. As you suggested, I have keenly looked in to it and searched of the ways, copying through TP, however I am curious about knowing t...
-
Hi coleman, Your logic seems to be perfect. Same logic worked for my both RJ and RJ2 controllers.
-
Thank You for your response. The PLC is AB MICRO 830 and the programming software is CCW. I would like to ask you how am i suppose ot proceed with the conversion of robot DI to that of robot WO? A...
-
Hi Muhammad, Have you checked the speed override menu from setup for any wrong setting? If not then please check it. You may find solid points there regarding your problem :)
-
Hey Laurance, Is there any possibility of a macro or program which is using the motion group which is not there? Once I got the error when I tried to copy a program from the robot having an extra ...
-
Thank You for response Ishaq. I have researched well before posting my query here. Please help if possible and you know anything of the relevant material. Thank You
-
Hey laurance, have you thought about using the Kodak's 5 in 1 card reader? I will suggest you to try it as it is very good and will serve your needs.
-
Hi laurance, If i were in your place then i would have tried 355,0,5 85,90,95 175,180,185 ......... 355,360,5. Actually going to the 5s and then to the zero you are "telling" the robot the directio...
-
Hi Frankie!It seems like you have to spend some good money. Most probably you are likely to replace the main board. In case if you replace the main board then make sure you take backup because some...
-
Hi, such applications are only working when the camera is capturing the orientation and position of the given part with encoder belt and when the robot is using all information for picking the part...