Juan Turner
Comments
-
To me it seems like if such status continued to happen, then it would be suggesting to have a scheck on the grease over axis 2 and 3 for seeing if there is any type of glitter in grease or shaving....
-
Dear Chang, No, Not at all. All seems good but with an exception of arcing the linear movements regardless of the frames of jog and user tool. The tool which is used for staying parallel across the...
-
Dear laurance, I would suggest you to use the PLC for controlling positions. By doing so, you will be able developing a structure for the robotic program in a similar way for picking up. But I am n...
-
Hi Frankie, You need to have compiler of the exact version that is loaded in the controller. For example, if your controller has 7.1 version of KAREL then your compiler must also have 7.1 version, ...
-
Dear Howard, you got it right, i am trying to do it manually through using my teach pendent for creation of new TCP. Is there anything that you might help me with?
-
Hi laurance, there are numerous ways through which you can do this. However, the simplest way is using the EE connector over the arm for a direct interfacing the components required. Now, if this i...
-
dear chang,I meant to ask the version of FANUC robot controller and its software such as R-J3iB Arctool 6.4. Anyhow, I am now able to get your requirements now. You don't have to vary the speed wi...
-
Can you tell me what is the software level and controller generation? Also please mention whether you are taking an inch feed rate for instance changing or wire spool or actual parameters of wire f...
-
Hi howard, Aren't you seeing the CALIBRATE menu in the MASTER/CAL menu? It is there. Please check again.
-
Hi Laurance, In case if you are having a robot having program tool with builtin arc or handling then you need to have guidance about UI or RSR/PNS. This is actually utilization of digital IO or in ...