Sarwat Anjum
Comments
-
Hi There's something you need to keep in mind while replacing the battery. Using other than the recommended battery may result in the battery explosion. Replace the battery only with the specified ...
-
You can try out following inspections and actions: Check that the status display LED and 7-segment LED on the main board operate normally. if yes then Carry out an action according to the LED statu...
-
Hi Ezequielo! Seems like your fuses burnt. Can you tell us your Controller model? It will help to troubleshoot the issue.
-
Replacing the lithium battery Prepare a new lithium battery Turn the robot controller on for about 30 seconds. Turn the robot controller off. Pull out the battery unit located in the lower right p...
-
Hi Ezequielo, I wanted to tell that IPG has its own integration capability. You may want to try them?
-
Muhammad, Here it should be 253.004 Let me tell you an easy way to find out Gear Ratio: GO TO -> Controlled Start then MENU -> MAINTENANCE here you can see the Gear Ratio. Best!
-
Dear Bailey, There is a variety of brands and types of PLCs exist. Generally, this doesn't matter which PLC you choose, different methods are available to communicate between robot and PLC. for exa...
-
Hi There! You can interconnect NON SAFETY INPUT (NSI) with any DO with DCS Safe I/O connect software package. Hope this was helpful :)
-
DCS is complaining because it is not getting those signals from a safety PLC. Hi There, You will have to disable DCS, or disable the SAFEIO mapping in the DCS menu that is driving those faults. In ...
-
Hi, Can you Explain your question? ARC MATE50 iD/7L comes with R-30iB Plus Controller. You can check its data sheet https://www.fanuc.eu/~/media/files/pdf/products/robots/robots-datasheets-en/arcm...