Avatar

Ching Marenco

  • Total activity 67
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 1
  • Subscriptions 32
Follow

Activity overview

Latest activity by Ching Marenco
  • Ching Marenco commented,
    1. Community
    2. Electrical Design
    3. Roboguide to Plc

    Thanks friend, I looked to the other sources as well. KEPSERVER EX software people are using for simulation.  Great Info. 

  • Ching Marenco commented,
    1. Community
    2. Electrical Design
    3. FANUC I/O

    Really great explanation. I found the DI / DO very to be very useful and easy configuration. I referred this forum for Rack configuration also. Soon I am planning to attempt first configuration. Th...

  • Ching Marenco commented,
    1. Community
    2. Troubleshooting — FANUC
    3. Servo Gun Tip Dressing Program

    1. WR_SET01     --   This program is used to insert value for wearing of tip. One thing to be take note on this that it should be run only when your tips are worn and you are replacing the old tip...

  • Ching Marenco commented,
    1. Community
    2. Troubleshooting — FANUC
    3. Singularity Avoidance Query

    I agree with Cherly , Moreover if you take certain jog moves , which can eliminate singularity  1. Make sure J4 and J6 do not cross each other at zero degree. 2. Use WJNT mode ,  3. Use roboguide ...

  • Ching Marenco created a post,
    Answered

    Pressure Conformation before welding

    1. Community
    2. Mechanical Design

    Hello to everyone ,  I want to setup pressure conformation for our  welding machine. At the end of day , we used to turnoff gas from gas supply and at next day when we start again the welding cycle...

    • Edited
    • 2 followers
    • 1 comment
    • 0 votes
  • Ching Marenco created a post,

    I/O assignment Delete Query

    1. Community
    2. Troubleshooting — FANUC

    Hey ,  I am not able to delete I/O assignment. I have tried restarted many times but it is not clearing .I have not any password setup as well. Can anyone help me in this ?

    • Edited
    • 3 followers
    • 2 comments
    • 0 votes
  • Ching Marenco created a post,
    Answered

    FANUC Teach Pendant ON/OFF switch Part No.

    1. Community
    2. Electrical Design

    Hey Everyone,  After a long usage of the ON/OFF switch on RJi3B teach pendant , it is not working properly now. I think i need the replacement. Can anyone tell me the part no. of it or where can i ...

    • 3 followers
    • 2 comments
    • 0 votes
  • Ching Marenco commented,
    1. Community
    2. Troubleshooting — FANUC
    3. Lincoln Weld Issue

    Vicky Kanne As you have mentioned the store person has formatted everything and installed S/W. and seller has not done the welding configuration with the welder machine. You will need to configure ...

  • Ching Marenco commented,
    1. Community
    2. Electrical Design
    3. External E-stop always pressed

    Chadwick Dockstader If you have set up the connection in User Input signals.  Go To Menu --> System --> Config --> Enable UI Signals --> False   After setting it up , You can reset and move your ro...

  • Ching Marenco commented,
    1. Community
    2. Mechanical Design
    3. Bend Mig wire coming from nozzle

    Cherly Hopf You can use an equipment , Which can be attached in feeding system. Its known as wire straightener.  LincoIn and many other robot companies have this type of system attached on their we...